AQUA SHIELD
PRODUCT DATA SHEET
WATER REDUCIBLE COATINGS

WAC2

PRODUCT CODEAQUA-SHIELD WAC2 SERIES
END USECOATING FOR PROTECTION OF METAL SURFACES
RESIN TYPEWATER-REDUCIBLE ACRYLIC
SOLVENT TYPEWATER
VISCOSITY65 K.U. (KREBS UNITS)
VOLUME REDUCTIONNOT NORMALLY REQUIRED, IF NECESSARY THIN 5-10% WITH WATER.
WEIGHT/GALLON8.6 ± 0.2 LBS./GALLON
WEIGHT % SOLIDS41 ± 2.0
VOLUME % SOLIDS± 2.0
SUBSTRATESTEEL OR OVER MOST EXISTING ENAMEL PAINTS.
PRETREAT & CLEANSSPC-SP2 HAND OR SSPC-SP3 POWER TOOL CLEANING. PRODUCT ALSO WORKS OVER BLASTED STEEL SSPC-SP6.
WET FILM5 MILS
DRY FILM2 MILS
FLASH POINT>180° F (SETAFLASH CLOSED CUP)
GLOSS 60°HIGH
DRY TIME DRY TO TOUCH: 15 - 20 MINUTES
V.O.C.1.60 LBS./GALLON
CHARACTERISTICSGOOD IMPACT AND ABRASION RESISTANCE, GOOD MAR RESISTANCE, USED AS A DTM COATING FOR THE OEM INDUSTRY.

The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this website do not constitute a warranty, whether expressed, or implied as to the product performance. Watson can guarantee this product to conform to our standards of quality, and our liability, if any shall be limited to replacement of defective materials. Any or all technical information is subject to change without notice. SEE THE PRODUCT MATERIAL SAFETY DATA SHEET (MSDS) AND LABEL WARNINGS FOR ADDITIONAL SAFETY INFORMATION.