|
ARMOREX | PRODUCT DATA SHEET | ANTI-CORROSION COATINGS |
| | | | | PRODUCT
CODE | P2865 | | END USE | METAL
PRIMER | | RESIN TYPE | SINGLE COMPONENT MOISTURE CURE
URETHANE | | SOLVENT
TYPE | AROMATIC | | VISCOSITY | 30-35" #3
ZAHN | | BAKE TIME &
TEMP. | N/A | | VOLUME
REDUCTION | N/A | | WEIGHT/GALLON | 9.4-9.8
LBS. | | WEIGHT %
SOLIDS | 65 ± 2 |
| VOLUME %
SOLIDS | 55 ± 2 |
| SUBSTRATE | STEEL | | PRETREAT &
CLEAN | SSPC-SP2, SSPC-SP3, OR
SSPC-SP6 | | WET FILM | 4-5 MILS | | DRY FILM | 2-3 MILS | | FLASH POINT | 46F | | GLOSS 60 | LOW | | THINNER
RATIO | UP TO 10% BY VOLUME WITH RA-80
THINNER AS NECESSARY TO SPRAY | | V.O.C. | 3.20 LBS./GAL, 384
GMS/LTR | | CHARACTERISTICS | EXCELLENT RESISTANCE TO
CHEMICAL AND SALTS. EXCELLENT ADHESION OVER HAND AND POWER TOOL
CLEANED SURFACES. |
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this website do not constitute a warranty, whether expressed, or implied as to the product performance. Watson can guarantee this product to conform to our standards of quality, and our liability, if any shall be limited to replacement of defective materials. Any or all technical information is subject to change without notice. SEE THE PRODUCT MATERIAL SAFETY DATA SHEET (MSDS) AND LABEL WARNINGS FOR ADDITIONAL SAFETY INFORMATION. |