ARMOR SHIELD
PRODUCT DATA SHEET
RUST PREVENTIVE COMPOUND

AS-8300

PRODUCT CODEARMOR-SHIELD AS8300 SERIES
END USESURFACE TOLERANT COATINGS FOR STRUCTURAL STEEL AND BRIDGES
RESIN TYPECALCIUM SULFONATE
SOLVENT TYPEMINERAL SPIRITS
VISCOSITY90-120 K.U. (KREBS UNITS)
VOLUME REDUCTIONNOT NORMALLY REQUIRED, IF NECESSARY THIN 5-10% WITH MINERALS SPIRITS
WEIGHT/GALLON9.7 ± 0.2 LBS./GALLON
WEIGHT % SOLIDS71 ± 2.0
VOLUME % SOLIDS56 ± 2.0
SUBSTRATESTEEL OR OVER EXISTING COATINGS, INCLUDING LEAD BASED PAINTS.
PRETREAT & CLEANTYPICALLY POWER WASH FOLLOWED BY SSPC-SP2 OR SSPC-SP3. PRODUCT ALSO WORKS OVER BLASTED STEEL.
WET FILM9-11 MILS
DRY FILM5-6 MILS
FLASH POINT125° F (SETAFLASH CLOSED CUP)
GLOSS 60°NA
DRY TIMEOVERNIGHT DRY
V.O.C.2.82 LBS./GALLON
CHARACTERISTICS

The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this website do not constitute a warranty, whether expressed, or implied as to the product performance. Watson can guarantee this product to conform to our standards of quality, and our liability, if any shall be limited to replacement of defective materials. Any or all technical information is subject to change without notice. SEE THE PRODUCT MATERIAL SAFETY DATA SHEET (MSDS) AND LABEL WARNINGS FOR ADDITIONAL SAFETY INFORMATION.